Creating Your Own Custom Transparencies
-
In Photoshop, or the program you’re most comfortable
with, create a template that is 49mm high by 50mm wide.
-
In the center of this template, create a circle that
is 22mm in diameter. This is your image area and your design should
not stray outside of this circle.
-
Create your design inside the 22mm circle.
-
Print your file on a high quality transparency paper.
These can be purchased at any major office supply store.
-
Cut out your 49mm x 50mm template and slide it into
the brackets on the front of the first lens of the GoboMan Projector
Light.
Additional Tips:
Designs should be placed into the brackets upside down and backward.
Try creating a design on a black background so that only your design
shows up, and not your design floating in a pool of white light.
For added stability, you can put your custom transparency into a
slide casing, also available for purchase at major office supply stores,
but this is not necessary, and your transparency will be able to stand
alone in the lighting fixture.
(The directions above are from
www.goboman.com:
Visit the site for some great Gobo products and ideas)
Note: I modified the size a bit to fit my EZ Lighting Projector.
Click below for some directions if your using the LED Projector:
Personalized Slide
Studio
